Suitable for lawn tractors, boats, motor boats, snowmobiles and trimmers, etc. Strong Suction - Designed for 12V battery-powered bung-mounted transferring, this pump is perfect for fuel tanks on trailers or trucks. It can pull fuel at depths of 9.8 ft. And discharge fuel up to heights of 26 ft.
High Flow Rate - industry standard transfer pump dispenses up to 15 GPM, to ensure efficient fueling. Protection Against Overheating - Engineered to exceed the industry's most stringent safety standards, the pump is constructed with thermal overload protection to prevent the motor from overheating during abnormal usage. Superior Quality - 12V 15 GPM Fuel Transfer Pump body is made of cast iron, which is sturdy and durable. The pump body adopts a waterproof design, and the pump has a built-in filter and a bypass valve. Package include Discharge Hose & Auto Nozzle.
Ball Bearing Construction - For the design of ball bearing, no lubrication is required in our gasoline pump. Easy Installation - The fuel pump has a removable junction box that rotates 180-degrees for ease of electrical wiring and installation in tight spaces.
Advantages of rotary vane technology - Increased suction lift, No performance loss due to vane wear, Self-priming ability, Easy maintenance, Consistent performance. To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve.
Electrical wiring should be performed ONLY by a licensed electrician in compliance with local, state, and national electrical code NEC/ANSI/ NFPA 70, NFPA 30, and NFPA 30A, as appropriate to the intended use of the pump. Threaded rigid conduit, sealed fittings, and conductor seal should be used where applicable.
The pump must be properly grounded. Improper installation or use of this pump can result in serious bodily injury, or death!
To ensure safe and proper operation of your equipment, it is critical to read and adhere to all of the following safety warnings and precautions. Improper installation or use of this product can cause serious bodily injury or death! NEVER smoke near the pump, or use the pump near open flames when pumping a flammable liquid! A filter should be used on the pump outlet to ensure no foreign material is transferred to the fuel tank. Threaded pipe joints and connections must be sealed with the appropriate sealant or sealant tape to minimize the possibility of leaks. Storage tanks must be securely anchored to prevent shifting or tipping when full or empty. To minimize static electricity build up, use only static wire conductive hose when pumping flammable fluids, and keep the fill nozzle in contact with the container being filled during the filling process.The pump motor is equipped with thermal overload protection; if overheated, the motor will shut off to prevent damage to the windings. This product shall not be used to transfer fluids into any type of aircraft. This product is not suited for use with fluids intended for human consumption or fluids containing water. Please leave us your full name, your telephone number and detailed address when ordering.
We try our best to pack the products as good and safe as possible, so they always arrive in a good condition. We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
With these parts you can replace your defective parts simply plug and play. 24 months without mileage limitation. Please compare carefully with Photos or OE number before purchasing the part. We try our best to pack the products as good and safe as possible, so they always arrive in a good condition. With these parts you can replace your defective parts simply plug and play.
Please compare carefully with Photos or OE number before purchasing the part.