1953-54 Chevy Car Steel Fuel Injection Gas Tank COMBO + Sender & Pump 18 Gallon

  

1953-54 Chevy Car Steel Fuel Injection Gas Tank COMBO + Sender & Pump 18 Gallon. This is a brand new 1953 and 1954 Chevy passenger car STEEL gas tank COMBO fuel sending unit and Pump. Has a fuel drain plug. Internal Reservoir Tray - Absolute Necessity for Fuel Injection.

Block-Off plate for non fuel injected cars. Includes mounting straps, gaskets & O-ring sealed screws.

9-1/2" x 21-1/4" x 9-1/4. It also has an internal reservoir tray and an accessory opening for use with fuel injection.

This is the extra capacity tank. Changing from regular to extra capacity requires included new straps. The GPA-4 Walbro In-tank fuel pump assembly. Heavy 10 Gauge No-Warp Mounting Plate.

255 LPH and up to 650 HP. Preferred pump for LS based swaps.

Assembly has the pressure port, the return port and a vent port. (They are 1/4 npt female). The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.

The TAN-GME fuel level sending unit is. The New 5 Bolt Hole Sending Unit is for Use with Pre-1964 GM Fuel Gauges, and the. Of this sending unit is 0 ohm - 30 ohm (0 ohm is empty, 30 ohm is full). This sending unit will not work with 1965 and newer GM Gauges.

Includes five special o-ring bolts and mounting gasket. The sending unit mounts with five mounting screws. It works on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground they work on all 6-24 volt systems positive or negative ground. Made with a high quality ceramic board rheostat.

The resistance of your fuel sender should match that of your gauge. We do have other sending units available. This heavy duty steel tank is the perfect addition to your classic Chevy project and is on sale here at a huge discount.

New parts are being added daily! Whether you're a novice rodder or an experienced builder, there is something here for you! 53-CGX + GPA-4 + TAN-GME.

Please wait for us to send you a combined invoice before paying. We have discount prices on thousands of parts for your Street Rod, Hot Rod, and Custom Car or Truck.

Parts are added to our store daily, so check back often for the latest deals! Plus, we have access to thousands of parts that are not listed.

We do get hundreds of emails daily, so at times it may take us up to 72 hours to respond to your emails. Create listings that get noticed! With Auctiva's 1,800+ Templates. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Tanks & Filler Necks". The seller is "gearheadworld" and is located in this country: US.

This item can be shipped to United States.

• Manufacturer Part Number: 53-CGX + GPA-4 + TAN-GME
• Brand: Tanks INC