The tank is designed to bolt up to the bottom side of the frame rails but it can be mounted in different configurations including on top or even in-between the rails in some cases. It is up to the installer to drill and locate the mounting holes.
It has a stub filler neck with a 6" long fuel filler hose (we also have a version with a 2" neck and aluminum cap - TM6372-T). It has a large fuel pump tray already installed and prevents fuel starvation. Made of galvanized steel and powder coated silver on the outside. This is the preferred pump for fuel injection based swaps. The assembly has the pressure port, the return port and a vent port.
(They are 1/4 npt female). The pump and sending unit are not installed. Check our other auctions for more fuel tanks, steering, frame and suspension parts. This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm.