High Pressure Fuel Pump fits Ford Fusion 1.5L 2014-2020 DS7Z9350A DS7G-9D376-DB

  

Best store of motor parts. Durable and built to last.

Remanufactured Part & High Quality. Direct replacement, NOT require any modification. Simply direct replacement, Easy Installation?

Installation instruction is not included. 1x High Pressure Fuel Pump.

Compatible with the following vehicles. How to Install High Pressure Pump. Detect high pressure pump O-ring and use clean engine oll slightly wetting insert roller tappet into vacuum pump. Rotate the crankshaft until the roller tappet is at its lowest point Insert the high pressure pump into the vacuum pump. Cross tighten the fastening bolt by hand, and cross tighten the fastening bolt with the specified torque of 20N.

Use engine oil to infiltrate the ball head of the high pressure hose and install it Tighten the lock nut of the fuel distributor. Indicated by the arrow in the drawing with awrench. Fasten the high pressure pipe connector with a wrench and tighten the live joint nut of the high pressure tube with another. Install high pressure pipe clamps and use 5N. M torque to tighten clamps.

Start the engine after installation to observe whether. There isoil leakage on each interface. Please check the part number carefully, confirm it suited to your needs.

1PCS High Pressure Fuel Pump. We do not work holidays in China. If you we are not satisfied with the product or service, please contact me and don't give us. Negative or natural feedback, We must give you a satisfactory solution.