Universal Steel Gas Tank Combo EFI Tank, 255 lph Pump & Sending Unit

  
Here we have a new universal steel fuel tank combo for use on almost project with fuel injection. Our part number is U3GP - Combo. They are built by Tanks Inc. And measure 35" x 11 1/2" x 11 1/2. Used with our'GPA' series in-tank fuel pumps. Internally baffled to minimize sloshing. Includes mounting brackets at each end & threaded bolt-on neck & cap. This is the preferred pump for LS based swaps. The assembly has the pressure port, the return port and a vent port. (They are 1/4 npt female).

This combo includes one fuel level sending unit. Specify which one you need. Here are the universal fuel level sending units we have available. TAN-SW (240 ohm empty - 33 ohm full - Normally used with most Autometer, Stewart Warner & Classic gauges).

TAN-VDO (10 ohm empty - 180 ohm full - Normally used with most VDO gauges). TAN-GME (0 ohm empty - 30 ohm full - Normally used with most 1964 and older GM gauges). TAN-GML (0 ohm empty - 90 ohm full - Normally used with most 1965 - 1997 GM gauges).

TAN-FDL (16 ohm empty - 158 ohm full - Normally used with most 1987 & up Ford gauges). There are always exceptions to the above list.

The fuel pump and sending unit are not installed in the tank. Check our other auctions for more fuel tanks, steering, frame and suspension parts. This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm.