They are built by Tanks Inc. And measure 34" x 15" x 7 1/2. Includes 3/8" pick-up tube & vent & 3" threaded bolt-on neck & cap. This tank allows you have the filler neck on either the top or on the end. This is the preferred pump for LS based swaps.
The assembly has the pressure port, the return port and a vent port. (They are 1/4 npt female).This combo includes one fuel level sending unit. Specify which one you need. Here are the universal fuel level sending units we have available. 240 ohm empty - 33 ohm full. Normally used with most Autometer, Stewart Warner & Classic gauges.
10 ohm empty - 180 ohm full. Normally used with most VDO gauges. 0 ohm empty - 30 ohm full. Normally used with most 1964 and older GM gauges. 0 ohm empty - 90 ohm full.
Normally used with most 1965 - 1997 GM gauges. 73 ohm empty - 10 ohm full. There are always exceptions to the above list. The fuel pump and sending unit are not installed in the tank.We also have this tank with a neck and rubber hose for remote fill use. Check our other listings for this U9-A-NB-T tank. Check our other auctions for more fuel tanks, steering, frame and suspension parts. This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Tanks & Filler Necks". The seller is "leadmineproducts" and is located in this country: US. This item can be shipped to United States.