Here we have a new universal steel fuel tank combo for use on almost project with fuel injection. Our part number is U3-GPH Combo.
They are built by Tanks Inc. And measure 35" x 11 1/2" x 11 1/2. Used with our'GPA' series in-tank fuel pumps. Internally baffled to minimize sloshing.
Includes mounting brackets at each end & 2 filler neck and hose. This is the preferred pump for LS based swaps. The assembly has the pressure port, the return port and a vent port. (They are 1/4 npt female).
This combo includes one fuel level sending unit. Specify which one you need. Here are the universal fuel level sending units we have available.
TAN-SW (240 ohm empty - 33 ohm full - Normally used with most Autometer, Stewart Warner & Classic gauges). TAN-VDO (10 ohm empty - 180 ohm full - Normally used with most VDO gauges).TAN-GME (0 ohm empty - 30 ohm full - Normally used with most 1964 and older GM gauges). TAN-GML (0 ohm empty - 90 ohm full - Normally used with most 1965 - 1997 GM gauges). There are always exceptions to the above list. The fuel pump and sending unit are not installed in the tank. Check our other auctions for more fuel tanks, steering, frame and suspension parts.
This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Tanks & Filler Necks".
The seller is "leadmineproducts" and is located in this country: US. This item can be shipped to United States.